This page lists routers and wireless access points that people have used successfully with DSLinux.
If a router is not listed here, it doesn't mean that it doesn't work, only that no one who has this router has tested it with DSLinux and posted the results here.
Rules
Please only list devices that work!
Please be very specific with the name of your router. Simply listing a device as "DLink" or "Linksys" will not help anyone. "Linksys WRT54G v3.1" is much better, for example.
You don't have to list your own name, but it might help people if they want to contact you in case they have a question. Add any issues or special circumstances of your setup in the "Comment" field. Thanks for contributing.
The List
Router Model |
My name is... |
Comment |
2wire BT Wireless Home Hub 1800HG |
Moobert |
DHCP and WEP works using WFC. |
3com OfficeConnect ADSL Wireless 11g Firewall Router |
aves |
Had some problems, but after switching to channel 1 + 11b only: DHCP, 128bit WEP works |
Actiontec GT701-WG (Qwest DSL modem) |
numbertwo |
Works great with static ip and 128bit WEP. DHCP did not work. |
Apple Airport (Dual Ethernet) |
antgeth |
DHCP only works with v4.0.6 or lower firmware. |
Apple Airport Extreme |
cayenne |
ASCII WEP keys need to be exactly 13 characters |
Acer WLAN-G-RU1 |
silentguy |
WEP works, DHCP works (at least using a PC as DHCP server) |
Asus Wl500gx |
modrak |
tried without auth - Oleg's firmware 1.9.2.7-7e |
Belkin F5D7230-4 v8000 |
Skywire |
With SSID broadcast, WEP, and DHCP on channel 11 -- doesn't seem to work on channel 1. |
Cisco Aironet (AIR 1230-B Series) |
cbeok |
As of 9-08-07, DHCP works well (sorry, I don't have administration access to the router, so I don't know its firmware version). |
Cisco Aironet 1200 |
modrak |
tried without auth - DHCP doesn't work, need to use static IP. Roaming doesn't work, DS sees 6 separate APs |
D-Link DI-524 |
Nfearnley |
WPA is not supported by DSLinux, so I turned off encryption. DHCP does not work. Connection only worked twice. |
D-Link DI-524 |
nana |
Newest firmware revision works fine with DHCP. Havend tested wep encryption yet. |
D-Link DI-624+ |
Ebeno |
WEP works, DHCP doesn't. Works with static IP and settings. |
D-Link WBR-1310 |
Doctor |
DHCP, WEP 64 and 128 tested and work, have to cycle interface nds for new settings to take (ifconfig nds down;ifconfig nds up) |
Freebox V.4 + Wi-Fi 802.11G (PCMCIA) |
LEXLuTHoR] |
WEP (Hex) & DHCP works, MAC Filtering ON (tested on R4DS Card) |
FRITZ!Box WLAN 3070, Firmware-Version 19.04.07 |
Butzel |
WEP works, DHCP relayed from 2nd Fritz.Box (because this is my network-infrastrukte) |
Hawking HWR54G, Revision M |
chongtin |
Updating firmware to Version 1.1 Release 2C is a MUST, or the performance of the router is poor. Tested with WEP 64 and static IP setting. |
Linksys BEFW11S4 v2 with firmware 1.45.10 (April 15, 2004) |
m3lang3 |
DHCP, WEP 128 works. |
Linksys Wireless-B |
hedgehog |
DHCP & WEP work using channel 1. using firmware 1.50.14 |
Linksys WAG54GS v1 |
|
Static IP, DHCP & WEP work with Annex A 1.01.03 firmware. |
Linksys WRH54G |
Aaron Lehrian (JSMaster) |
Works when channel 6 is specified, WEP works also, though not thouroghly tested. |
Linksys WRTGS54 v4 |
I.C.Wiener |
Works (Firmware: DD-WRT v23 SP2) |
Linksys WRTGS54 v5 |
Mobadass |
Works haven't tested everything though |
Linksys WRTGS54 v4 |
I.C.Wiener |
Works (Firmware: DD-WRT v23 SP2) |
Linksys WRT54GL v1.1 |
stsp |
I've tried with the openwrt firmware only, not with the original one. |
Linksys WRT54GL v1.1 |
pointless |
Firmware: DD-WRT v23 SP2 (09/15/06) vpn (tried without auth) |
Linksys WRT54G v8 |
skibur |
DHCP, WEP 64 bits (128 bits should work), and MAC Filters works. |
Linksys WRV54G version 1(or unmarked) |
Weex |
DHCP, WEP 128 works. |
Linux 2.6 with SMC2532W-B (Prism2 card) |
Doctor |
DHCP, Wep 64 works fine. Using hostap driver put into master mode. |
Livebox Inventel |
sam101 |
DHCP doesn't works with a DS ,so use static IP adresses . WEP work .Firmware:A2pBT009c1.d17d |
MSI RG54G2 |
pointless |
Firmware: R1.0.8.0 ETS[Oct 13 2005] (tried without auth) |
NETGEAR DG834 |
zmx |
WEP works, static IP, broadcast SSID, DHCP seems to stop the startup script |
NETGEAR MR-814 |
Pepsiman |
DHCP doesn't work, so use static IP addresses. WEP does work. |
NETGEAR WG602 v3 |
Asimov |
DHCP, Fixed IP, WEP |
NETGEAR WGR614v5 |
arbitrary |
WEP works, static IP, broadcast SSID, DHCP works, MAC filtering off |
NETGEAR WGT634U |
Works fine with fixed IP settings and WEP (WFC works with DHCP, dslinux apparently no). |
|
PC running OpenBSD 3.9 with DIGITUS DN-7006G-RA PCI wireless adapter (Ralink chipset) in HostAP mode |
stsp |
WEP did not work back when I tried, but this could have been due to open auth not working, which has been fixed in DSLinux since. |
Pentagram Cerberus ADSL WiFi 802.11g Lite |
Subaru |
rc.conf configured without DHCP WEP turned off connection works well used channel 11 |
USRobotics 5462, HW version 01 |
aletorchic |
Works with static IP, WEP (WFC works with DHCP, dslinux apparently no)(Runtime Code Version: V1.00.014,Boot Code Version: V0.00.07) |
USRobotics 8054 |
modrak |
tried without auth - everything works just fine. |
Yakumo Wireless Storage 60 |
Vogt31337 |
Installed OpenWRT WhiteRussian 0.9, works fine. |
ZyXEL Prestige 660HW-61 |
tr3 |
works |